C2M

Description

Electronic control panel for two C2M motors

• – Electronic panel designed for single-phase motors up to ¾ horsepower.
• – Used in installations with one or two motors.
• – Motor force is regulated with a potentiometer and soft stop time at the end of the operation.
• – Allows combinations through an 8-position micro-switch and another 1-position selector.
• – Base plate timings are: Waiting time for automatic closing, opening time, and closing time, opening and closing timings can be doubled by a micro-switch selection.
• – On the base plate, there is also a potentiometer to regulate the motor force, another one to select the soft stop time, another “Def1” for the phase shift between motor 2 and motor 1 in the opening, and another “Def2” for the phase shift between motor 1 and motor 2 in the closing.
• – It incorporates end-of-travel inputs for the second motor to stop the second motor.
• – There is an output for courtesy light of 230/120V, which can be selected as fixed or intermittent.
• – All push-button inputs are protected with Zener diodes and have a luminous indication with LED diode that indicates if the input is activated or not.
• – Offers the possibility of a radio card, to operate with a remote control.
• – Plug-in terminals.
• – 12V DC electro-lock.
• – Flashing light.
• – Garage light contact.
• – 12V DC output.
• – Opening and closing safety contact.
• – Force adjustment.
• – Soft stop at the end of opening and closing.
• – Automatic closing.
• – Alternative push-button.
• – Opening and closing end-of-travel switches.