CM-N
Electronic control panel for TOR with CM-N regulations
Description
Electronic panel for gate with CM-N regulation
- – Single-phase panel with zero-voltage relay switching.
- – Connection for pressure limiter.
- – Anti-crush feature.
- – Inputs with luminous indication.
- – Output for 12v electro-lock activation.
- – Garage light contact.
- – Optional card with flash and garage light or green and red traffic lights.
- – It has 2 independent “Safety” inputs, one for a photocell that operates during the gate closing and another that can be connected to a photocell or a Band with resistive contact.
- – The panel has a test output for photocells. It is used when installing photocells with a test input or emitter-receiver photocells.
- – We also have a pedestrian open push-button input.
- – Digital programming of times and potentiometers.
- – Plug-in terminals.
- – Radio card connector.
- – 12v DC electro-lock.
- – 12v AC and DC output.
- – 8K2 security input.
- – Opening and closing safety contact.
- – Force adjustment.
- – Soft stop at the end of opening and closing.
- – Automatic closing.
- – Alternative, pedestrian push-button.
- – Opening and closing end switch.
CM-N, CU CN
CM-N | |
Power supply | 230V/120V ±10% |
Motor power | 0.75HP |
Accessory power output | 12V ac 200mA |
Garage light contact | VOLTAGE-FREE |
Electric lock | 12V DC 1 AMP |
Opening time | 3 sec. to 40 sec. 40-80 sec. |
Closing time | 3 sec. to 40 sec. 40-80 sec. |
Automatic closing wait time | 5 sec. to 110 sec. |
Radio card | OPTIONAL |
Flash/light/traffic light card | OPTIONAL |
Operating temperature | 0 to 70ºC |
Dimensions without box | 169X140mm |
Electronic board for gate with CM-N regulation
- – Single-phase board with zero voltage relay switching.
- – Connection for pressure limiter.
- – Anti-crushing.
- – Inputs with light indication.
- …