CTC / CTS
Control panel triphasic for multiple applications and different types of engines
Description
CTC (Three-phase Control Panel with motor protector – + handle)
CTS (Three-phase Control Panel without motor protector – + handle)
- – Versatile three-phase control panel for multiple applications and different types of motors.
- – Optional cards. Radio card, photocell inhibition card, and magnetic detector card.
- – Regulation of operating times and automatic closing through potentiometer.
- – We have push-buttons for opening, closing, and stop.
- – Output for 230/120V flash activation and garage light contact.
- – It has two independent “Safety” inputs: for a photocell that operates during the gate closing and another one to connect a photocell or a “Pneumatic band” with resistive contact. The latter can be selected using the micro-switch. With the switch in OFF, the “Safety” only operates during opening, stopping the gate. It is possible to stop the gate and reverse for 1 second both in opening and closing. Switch in ON. This input can be configured as a resistive band of 8.2KΩ or as a Normally Closed contact using a selector.
- – The panel has an output for testing photocells. It can be used when installing photocells with a test input or emitter-receiver photocells.
- – In case of using a photocell inhibition card, it is recommended NOT to use the test.
- – Programming of potentiometer times
- – Plug-in terminals
- – 12V DC output
- – Automatic closing
- – Alternative push-button, stop, open, close
- – Opening and closing end switch
CTC, CTS
CTC / CTS | |
Control panel power supply |
230V/120V ±10% |
Motor power supply | 220V/380V 3 hp |
Motor power | 1.5HP / 3HP |
Accessory power output | 12V DC 500mA |
Garage light contact | Voltage-free |
Flash relay | 220V 10A |
Automatic closing wait time | 5 sec to 120 sec |
Operating time | 8 sec to 80 sec |
Radio card | Optional |
Operating temperature | 0 to 70ºC |
Dimensions without box | 169X140mm |
CTC (Three-phase Control Panel with motor protector – + handle)
CTS (Three-phase Control Panel without motor protector – + handle)
- – Versatile three-phase control panel for multiple applications and different types of motors.
- – Optional cards. Radio card, photocell inhibition card, and magnetic detector card.
- …