CRFEM
Electronic control panel for maneuver CRFEM
Description
CRFEM control panel with force regulation for electromechanical + hydraulic operators.
- -Single-phase with relay switching at zero voltage.
- -Inputs with light indication.
- -Output for 12v electric lock activation.
- -Garage light contact.
- -Optional card with flashing light and garage light or green and red traffic lights.
- -It has 2 independent “Safety” inputs, one for a photocell that acts during door closing and another that can be connected to a photocell or a “Pneumatic Band” with resistive contact.
- -The control panel has a test output for photocells. It can be used in the case of installing photocells with a test input or Emitter-receiver photocells.
- -We have a pedestrian opening pushbutton input.
- -Digital time and potentiometer programming.
- -Plug-in terminals.
- -Radio card connector.
- -12v DC electric lock.
- -12v AC and DC output.
- -8K2 safety input.
- -Opening and closing safety contact.
- -Force regulation.
- -Soft stop at opening and closing.
- -Automatic closing.
- -Alternative, pedestrian pushbutton.
- -Opening and closing limit switch.
CRFEM, CRF MINI
CRFEM | |
Power supply | 230V, 50Hz/120V, 60Hz ±10% |
Motor power | 0.75HP |
Accessory power output | 12V ac 200mA |
Garage light contact | VOLTAGE FREE |
Electric lock | 12V DC 1 AMP |
Opening time | 3 sec to 40 sec. 40-80 sec. |
Closing time | 3 sec to 40 sec. 40-80 sec. |
Automatic closing waiting time | 5 sec to 110 sec. |
Radio card | OPTIONAL |
Flash/light/traffic light card | OPTIONAL |
Operating temperature | 0 to 70ºC |
Dimensions without box | 169X140mm |
CRFEM maneuver electronic panel with force regulation for electromechanical + hydraulic
- – Single-phase with relay zero voltage switching.
- – Inputs with light indication.
- – Output for activation of 12v electric lock.
- …